How to apply your vinyl art

Your wall art will come in three layers.

Middle Layer -   The actual letters or design

Bottom Layer -   White shiny backing paper

Quick and Easy steps for application:

1.         Use a credit card or like tool to squeegee over your lettering to ensure it is sticking firmly to the transfer paper.

2.        Choose your desired wall location and place your design exactly where you want it.  Use small pieces of masking tape across the top to hold it into place.

3.        Use the ceiling or wall to ensure the letters are straight. Measure from the letters themselves NOT THE WHITE PAPER. Measure from the beginning, middle and end of the design.

4.        Adjust straightness by pulling up tape, adjusting the design and re-taping it in place.

5.        Once the design is straight, put a longer piece of tape across the top.

6.        The masking tape is now serving as a hinge. Flip up the design and CAREFULLY peel off the backing.

7.        Flip the lettering down, pulling down with no wrinkles.

8.        Use the credit card or like tool to rub over the design and securely adhere it to your wall.  Work from the center down and out.

9.        Carefully peel off the transfer sticking paper to reveal your letters or design.  Pull at an angle and watch that the letters are all sticking to your wall.  If you notice that any letters are pulling up with the sticking paper, re-rub onto the wall, or help pull it off with your fingers and smooth it onto the wall.

                                                  YOU’RE DONE!